Wir alle wissen, dass im Zeitalter des Internets ist es ganz einfach, die Informationen zu bekommen. Aber was fehlt ist nänlich, Qualität und Anwendbarkeit. Viele Leute surfen im Internet die Schulungsunterlagen zur Microsoft 70-462 Zertifizierungsprüfung. Und Sie wissen einfach nicht, ob sie zu glauben ist. Hier empfehle ich Ihnen die Schulungsunterlagen zur Microsoft 70-462 Zertifizierungsprüfung. Sie haben im Internet die höchste Kauf-Rate und einen guten Ruf. Sie können im Internet Teil der Prüfungsfragen und Antworten zur Microsoft 70-462 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann können Sie entscheiden, Pass4Test zu kaufen oder nicht. Und Sie können auch die Echtheit von Pass4Test kriegen.
Mit der Hilfe von Pass4Test brauchen Sie nicht so viel Geld für die Kurse oder viel Zeit und Energie für die Prüfung auszugeben. Sie können ganz einfach die Prüfung erfolgreich ablegen. Die Software zur Microsoft 70-462 Zertifizierungsprüfung wird Pass4Test nach den echten Prüfungen in den letzten Jahren erforscht. Die Fragen und Antworten zur Microsoft 70-462 Zertifizierungsprüfung von Pass4Test sind den realen Fragen und Antworten sehr ähnlich.
Wofür zögern Sie noch?Sie haben nur eine Chance. Jetzt können Sie die vollständige Version zur Microsoft 70-462 Zertifizierungsprüfung bekommen. Sobald Sie die Pass4Test klicken, wird Ihr kleiner Traum erfüllt werden. Sie haben die besten Schulungsunterlagen zur Microsoft 70-462 Zertifizierungsprüfung kriegen. Benutzen Sie ruhig unsere Prüfungsfragen und Antworten, werden Sie sicher die Prüfung bestehen.
Das IT-Expertenteam von Pass4Test haben eine kurzfristige Schulungsmethode nach ihren Kenntnissen und Erfahrungen bearbeitet. Diese Schulungsmethode könne Ihnen effektiv helfen, in kurzer Zeit den erwarteten Effekt zu erzielen, besonders für diejenigen, die arbeiten und zuleich lernen. Pass4Test kann Ihnen viel Zeit und Energir ersparen. Wählen Sie Pass4Test und Sie werden Ihre wünschten Schulungsmaterialien bekommen.
Viele IT-Fachleute haben das Microsoft 70-462 Zertifikat geträumt. Die Microsoft 70-462 Zertifizierungsprüfung ist eine Prüfung, die IT-Fachkenntnisse und Erfahrungen eines Menschen testet. Um die Prüfung zu bestehen braucht man viel Fachkenntnisse. Um diese Kenntnisse zu meistern muss man viel Zeit und Energie brauchen. Pass4Test ist eine Website, die Ihnen viel Zeit und Energie erspart und die relevanten Kenntnisse zur Microsoft 70-462 Zertifizierungsprüfung ergänzt. Wenn Sie Interesse an Pass4Test haben, können Sie im Internet teilweise die Fragen und Antworten zur Microsoft 70-462 Zertifizierungsprüfung von Pass4Test kostenlos als Probe herunterladen.
Exam Code: 70-462
Prüfungsname: Administering Microsoft SQL Server 2012 Databases
Aktulisiert: 2014-02-28
Nummer: 88 Q&As
Wenn Sie Pass4Test wählen, würden wir mit äußerster Kraft Ihnen helfen, die Prüfung zu bestehen. Außerdem bieten wir einen einjährigen kostenlosen Update-Service. Zögern Sie nicht. Wählen Sie doch Pass4Test. Er würde die beste Garantie für die Microsoft 70-462 Zertifizierungsprüfung sein. Schicken Sie doch die Produkte von Pass4Test in Ihren Warenkorb.
Als Anbieter des IT-Prüfungskompendium bieten IT-Experten von Pass4Test ständig die Produkte von guter Qualität. Sie bieten den Kunden kostenlosen Online-Service rund um die Uhr und aktualisieren das Prüfungskompendium auch am schnellsten.
70-462 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/70-462.html
NO.1 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if
any of the servers fail. You also need to minimize the amount of storage used by the database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.SQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.SQL Server that includes an application database configured to perform snapshot replication
H.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: H
Microsoft 70-462 exam fragen 70-462 testantworten 70-462
NO.2 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?
A.SQL Server that includes an application database configured to perform transactional replication
B.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.SQL Server that includes an application database configured to perform snapshot replication
E.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
Answer: A
Microsoft 70-462 dumps 70-462 prüfung
NO.3 DRAG DROP
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC.
ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.4 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
The differential backup of the reporting database fails. Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
B. Perform a point-in-time restore.
C Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
E. Restore the latest full backup. Then, restore the latest differential backup.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a page restore.
H. Perform a partial restore.
Answer: C
Microsoft dumps 70-462 70-462 zertifizierungsantworten 70-462 zertifizierungsfragen 70-462
NO.5 You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs. Your primary replica is available at
Server01\Contoso01.
You need to configure the availability group to have the highest availability. You also need to ensure that
no data is lost.
Which Transact-SQL statement should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Microsoft zertifizierungsfragen 70-462 prüfungsfragen 70-462 70-462 prüfung
NO.6 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
B. Perform a partial restore.
C. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
D. Perform a point-in-time restore.
E. Restore the latest full backup.
F. Perform a page restore.
G. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft 70-462 70-462 antworten 70-462
NO.7 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on
the reporting database.
You need to ensure that the databases are restored. You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
E. Perform a page restore.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a point-in-time restore.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft 70-462 prüfung 70-462
NO.8 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be
off-loaded from the primary database to another server. You also need to be able to add indexes to the
secondary database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.SQL Server that includes an application database configured to perform transactional replication
G.SQL Server that includes an application database configured to perform snapshot replication
HTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: F
Microsoft 70-462 70-462 70-462 zertifizierung 70-462 70-462 echte fragen
NO.9 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on
the transactional database. You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Perform a point-in-time restore.
D. Restore the latest full backup.
E. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
F. Perform a page restore.
G. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: F
Microsoft zertifizierungsfragen 70-462 70-462 echte fragen 70-462 prüfung 70-462 prüfungsunterlagen
NO.10 You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis.
Which configuration should you use?
A.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
BSQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
DTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.SQL Server that includes an application database configured to perform snapshot replication
F.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
Answer: E
Microsoft 70-462 zertifizierungsfragen 70-462 testantworten 70-462 zertifizierung 70-462 70-462 prüfungsfrage
Pass4Test bietet Ihnen die neusten C_TSCM42_66 exam Unterlagen und 646-048 pdf Fragen & Antworten mit hoher Qualität. Unser JN0-533 zertifizierung und 200-120 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative MB6-870 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/70-462.html