Warum wählen viele Leute die Schulungsunterlagen zur Cisco 642-691-Zertifizierungsprüfung von Pass4Test?Es gibt auch andere Websites, die Schulungsressourcen zur 642-691-Zertifizierungsprüfung von Pass4Test bieten. Unser Pass4Test steht Ihnen die echten Materialien zur Verfügung. Unser Eliteteam, Zertifizierungsexperten, Techniker und berühmte Linguisten bearbeiten neuerlich die neueste Cisco 642-691-Zertifizierungsprüfung. Deshalb klicken Sie Pass4Test Website, wenn Sie die Cisco 642-691-Zertifizierungsprüfung bestehen wollen. Mit Pass4Test können Sie Ihren Traum Schritt für Schritt erfüllen.
Pass4Test hat die spezielle Schulungsinstrumente zur Cisco 642-691 Zertifizierungsprüfung. Sie können mit wenig Zeit und Geld Ihre IT-Fachkenntnisse in kurzer Zeit verbessern und somit Ihre Fachkenntnisse und Technik in der IT-Branche beweisen. Die Kurse von Pass4Test werden von den Experten nach ihren Kenntnissen und Erfahrungen für die Cisco 642-691 Zertifizierungsprüfung bearbeitet
In den wenigen Jahren ist die Cisco 642-691-Zertifizierungsprüfung schon eine der einflussreichsten Zertiftierungsprüfung in Bezug auf das Computerkönnen geworden. Aber wie kann man einfach die Cisco 642-691-Zertifizierungsprüfung bestehen?Unser Pass4Test kann Ihnen immer helfen, dieses Problem schnell zu lösen. Pass4Test bietet Ihnen die Trainingsinstrumente für die 642-691-Zertifikationsprüfung. Die Inhalte der 642-691-Zertifikationsprüfung setzen sich aus den neuesten Prüfungsmaterialien von den IT-Fachleuten zusammen.
Exam Code: 642-691
Prüfungsname: Cisco (CCIP BGP + MPLS Exam (BGP + MPLS))
Pass4Test ist eine Website, die den Traum der IT-Fachleute erfüllen kann. Pass4Test bietet den Kandidaten die gewünschte Materialien, mit den Sie die Prüfung bestehen können. Machen Sie sich noch Sorgen um die Cisco 642-691 Zertifizierungsprüfung?Haben Sie schon mal gedacht, die relevanten Kurse von Pass4Test zu kaufen?Die Schulungsunterlagen von Pass4Test wird Ihnen helfen, die Prüfung effizienter zu bestehen. Die Fragen von Pass4Test sind den realen Prüfungsfragen ähnlich, fast mit ihnen identisch. Mit den genauen Prüfungsfragen und Antworten zur Cisco 642-691 Zertifizierungsprüfung können Sie die Prüfung leicht bestehen.
642-691 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/642-691.html
NO.1 Based on the network diagram shown in the exhibit, what is the correct configuration on the customer
edge router used to conditionally announce the customer networks to the ISP?
A. router bgp 65001
! neighbor commands not shown
network 192.168.8.0 mask 255.255.252.0
!
ip route 192.168.8.0 255.255.252.0 192.168.8.33
B. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0 summary-only
!
ip route 192.168.8.0 255.255.252.0 192.168.8.33
C. router bgp 65001
! neighbor commands not shown
network 192.168.8.0
network 192.168.9.0
network 192.168.10.0
network 192.168.11.0
!
ip route 192.168.8.0 255.255.255.0 null0
ip route 192.168.9.0 255.255.255.0 null0
ip route 192.168.10.0 255.255.255.0 null0
ip route 192.168.11.0 255.255.255.0 null0
D. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0 summary-only
!
router ospf 1
network 192.168.8.0 0.0.3.255 area 0
E. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0
!
ip route 192.168.8.0 255.255.252.0 null0
Answer: A
Cisco 642-691 antworten 642-691 zertifizierung 642-691
NO.2 Based on the topology diagram shown in the exhibit, when should BGP be used as the routing protocol
between the customer and the ISP?
A. If physical link failures can not be detected by the link-level procedures.
B. If the customer wants to affect how the ISP will route the customer's traffic out to the rest of the Internet.
C. If the ISP does not support static routing with the customer.
D. If the customer is using provider-assigned (PA) addresses inside the customer's network.
E. If the customer is using private addresses inside the customer's network.
Answer: A
Cisco 642-691 dumps 642-691
NO.3 On a dedicated subinterface implementation, PE-2 must establish an address-family vrf IPv4 BGP
neighbor relationship with which router?
A. CE-1
B. CE-2
C. PE-1
D. PE-IG
E. CE-1 and CE-2
F. PE-1 and PE-IG
Answer: B
Cisco prüfung 642-691 642-691 642-691 642-691
NO.4 For which purpose is the command mpls ldp maxhops used?
A. In large ATM-MPLS networks, the LFIB can become too large and it may be necessary to limit the
maximum diameter of the MPLS LSPs.
B. Because downstream-on-demand label allocation uses hop count to control loop detection, it maybe
necessary to limit the maximum diameter of the MPLS network.
C. Because end-to-end delay can cause problems with some voice applications, it may be necessary to
limit the maximum diameter of the MPLS network.
D. When interconnecting large frame mode MPLS and cell mode networks it may be necessary to limit the
maximum network diameter to prevent forwarding loops.
Answer: B
Cisco 642-691 zertifizierungsfragen 642-691
NO.5 Which two of the following statements regarding LDP are true? (Choose two.)
A. LDP can also be used between nonadjacent routers using multicast LDP hello messages.
B. LDP does not require periodic hello messages once the LDP session has been established between
the LDP peers.
C. LDP hello messages use TCP packets with a destination port number of 646.
D. Multiple sessions can be established between a pair of LSRs if they use multiple label spaces.
E. Per-platform label space can be identified by a label space ID of 0 in the LDP identifier field.
Answer: DE
Cisco zertifizierungsfragen 642-691 dumps 642-691
NO.6 What does the following command accomplish?
sanjose#clear ip bgp 10.1.1.1 in prefix-filter
A. The sanjose router will perform an outbound soft reconfig to the 10.1.1.1 neighbor.
B. The sanjose router will send out the ORF prefix-list so that a new route refresh will be received from the
1.1.1 neighbor.
C. The 10.1.1.1 router will perform an inbound soft reconfig on the updates from the sanjose neighbor.
D. The 10.1.1.1 router will send out the ORF prefix-list so that a new route refresh will be received from
the sanjose neighbor.
E. The bgp session between the sanjose and the 10.1.1.1 router will be reset so that all the new bgp
updates from the 10.1.1.1 router can be processed by the inbound prefix-list at the sanjose router.
F. The bgp session between the sanjose and the 10.1.1.1 router will be reset so that all the new bgp
updates from the sanjose router can be processed by the inbound prefix-list at the 10.1.1.1 router.
Answer: B
Cisco prüfungsfrage 642-691 prüfung 642-691 prüfungsfrage 642-691 642-691
NO.7 Refer to the exhibit.
\Which two of the following statements about the MPLS configurations are true? (Choose two.)
A. The VPI range being configured is the default VPI range.
B. The router is missing the mpls label protocol ldp configuration command on its ATM 0/0.1 subinterface
to make it an LC-ATM enabled subinterface.
C. There is a problem with the configurations because the control VC should be set to 0 32 instead.
D. The ATM switch is using VC merge since VC merge is enabled by default.
E. For MPLS label allocations, both VPI 6 and 7 can be used.
Answer: DE
Cisco testantworten 642-691 642-691 prüfungsunterlagen 642-691 642-691
NO.8 In a central services topology, which routes do client VRFs contain?
A. routes from the client site, but not from the server site
B. routes from the server site, but not from the client site
C. routes from both the client site and the server site
D. only EBGP routes from either the client site or the server site
Answer: C
Cisco exam fragen 642-691 642-691 642-691 antworten
NO.9 Refer to the diagram.
What problem can be caused by the second P router summarizing the loopback address of the egress PE
router.?
A. The first P router will be faced with a VPN label which it does not understand.
B. The second P router will be faced with a VPN label which it does not understand.
C. The egress PE router will not be able to establish a label switch path (LSP) to the ingress PE router.
D. A label switch path (LSP) will be established from the ingress PE router to the egress PE router, an
event that is not desirable.
E. The ingress PE router will not be able to receive the VPN label from the egress PE router via MP-IBGP.
Answer: B
Cisco originale fragen 642-691 zertifizierungsfragen 642-691
NO.10 What are three drawbacks of a peer-to-peer VPN using a shared provider edge (PE) router? (Choose
three.)
A. A full mesh of virtual circuits is required between the customer sites.
B. All the customers have to share a common IP address space.
C. Optimal routing between customer sites cannot be guaranteed.
D. The shared PE router has to know all routes for all customers.
E. Packet filters are required on the PE routers.
Answer: BDE
Cisco echte fragen 642-691 642-691 642-691 642-691 prüfungsunterlagen
Viele der Pass4Test 642-691 CCIP BGP + MPLS Exam (BGP + MPLS) Prüfungsvorbereitung Antworten sind in Vielfache-Wahl-Fragen (MCQs) FormatQualität geprüften CCIP BGP + MPLS Exam (BGP + MPLS) Produkte viele Male vor der VeröffentlichungKostenlose Demo der Prüfung Pass4Test 642-691 an Pass4Test.de. Um Ihre Zertifizierungsprüfungen reibungslos erfolgreich zu meistern brauchen Sie nur unsere Prüfungsfragen und Antworten zu Cisco 642-691 (CCIP BGP + MPLS Exam (BGP + MPLS)) auswendigzulernen.
没有评论:
发表评论