Jeder Kandidat der IT-Zertifizierungsprüfung ist sich im klar sein, dass diese Zertifizierung einen wichtigen Bedeutung in seinem Leben daestellen. Wir stellen den Kandidaten die Simulationsfragen und Antworten mit ultra-niedrigem Preis und hoher Qualität zur Verfügung. Unsere Produkte sind kostengünstig und bieten einen einjährigen kostenlosen Update-Service. Unsere Zertifizierungsschulungsunterlagen sind alle leicht zugänglich. Unsere Website ist ein erstklassiger Anbieter in Bezug auf die Antwortenspeicherung. Wir haben die neuesten und genauesten Schulungsunterlagen, die Sie brauchen.
Pass4Test ist eine gute Website, die effiziente Ausbildung zur Juniper JN0-314 Zertifizierungsprüfung bietet. And Pass4Test verspricht, dass Sie die Juniper JN0-314 Zertifizierungsprüfung bestehen können. Sonst geben wir Ihnen eine Rückerstattung. Vorm Kauf unserer Produkte können Sie im Internet teilweise die Fragen und Antworten zur Juniper JN0-314 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann werden Sie mehr Vertrauen in unsere Prodzkte haben. Sie können sich dann gut auf Ihre Juniper JN0-314 Zertifizierungsprüfung vorbereiten.
Pass4Test ist eine Website, die den IT-Kandidaten, die an der Juniper JN0-314 Zertifizierungsprüfung teilnehmen, Hilfsmaterialien bieten, so dass sie das Juniper JN0-314 Zertifikat erhalten. Die Lernmaterialien von Pass4Test werden von den erfahrungsreichen Fachleuten nach ihren Erfahrungen und Kenntnissen bearbeitet. Die alle sind von guter Qualität und auch ganz schnell aktualisiert. Unsere Prüfungsfragen und Antworten sind den realen Prüfungsfragen und Antworten sehr ähnlich. Wenn Sie Pass4Test wählen, können Sie doch die schwierige Juniper JN0-314 Zertifizierungsprüfung, die für Ihre Karriere von großer Wichtigkeit ist, bestehen.
Viele meiner Freude im IT-Bereich haben viel Zeit und Energie für die Juniper JN0-314 Zertifizierungsprüfung benutzt. Aber sie haben sich nicht am Kurs oder Training im Internet beteiligt. Für sie ist es schwer, die Prüfung zu bestehen. Und die Erfolgsquote ist auch sehr niedrig. Glünklicherweise bietet Pass4Test die zuverlässigen schulungsinstrumente. Die Schulungsunterlagen von Pass4Test beinhalten die Simulationssoftware und die Prüfungsfragen-und antworten. Wir würden die besten Prüfungsfragen und Antworten zur JN0-314 Zertifizierungsprüfung bieten, um Ihre Bedürfnisse abzudecken.
Wir sollen die Schwierigkeiten ganz gelassen behandeln. Obwohl die Juniper JN0-314 Zertifizierungsprüfung ganz schwierig ist, sollen die Kandidaten alle Schwierigkeiten ganz gelassen behandeln. Denn Pass4Test wird Ihnen helfen, die Juniper JN0-314 Zertifizierungsprüfung zu bestehen. Mit ihm brauchen wir uns nicht zu fürchten und nicht verwirrt zu sein. Die Schulungsunterlagen zur Juniper JN0-314 Zertifizierungsprüfung von Pass4Test sind den Kandidaten die beste Methode.
Weil es nicht leicht ist, die Juniper JN0-314 Zertifizierungsprüfung zu bestehen. So stellt geeignete Trainingsinstrument eine Garantie für den Erfolg dar. Pass4Test wird Ihnen so schnell wie möglich die Prüfungsmaterialien und Fragen und Antworten bieten, so dass Sie sich gut auf die Juniper JN0-314 Zertifizierungsprüfung vorbereiten und die Prüfung 100% bestehen können. Mit Pass4Test können Sie nicht nur erstmal die Prüfung erfolgreich ablegen, sonder auch viel Zeit und Energie ersparen.
Exam Code: JN0-314
Prüfungsname: Junos Pulse Access Control, Specialist (JNCIS-AC)
Aktulisiert: 2013-11-26
Nummer: 115 Q&As
JN0-314 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-314.html
NO.1 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A
Juniper originale fragen JN0-314 JN0-314 prüfungsunterlagen JN0-314 zertifizierungsantworten
NO.2 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D
Juniper JN0-314 zertifizierung JN0-314 echte fragen JN0-314 testantworten JN0-314 JN0-314 testantworten
NO.3 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B
Juniper JN0-314 zertifizierungsfragen JN0-314 JN0-314 JN0-314 testantworten
NO.4 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C
Juniper antworten JN0-314 JN0-314 prüfungsfragen JN0-314 exam fragen
NO.5 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D
Juniper exam fragen JN0-314 JN0-314 zertifizierungsantworten JN0-314
NO.6 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D
Juniper zertifizierung JN0-314 JN0-314 prüfungsfragen JN0-314 dumps JN0-314 prüfungsfragen
NO.7 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D
Juniper zertifizierungsantworten JN0-314 JN0-314 originale fragen JN0-314 JN0-314 antworten
NO.8 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E
Juniper JN0-314 JN0-314 JN0-314
NO.9 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B
Juniper antworten JN0-314 JN0-314 JN0-314
NO.10 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C
Juniper originale fragen JN0-314 zertifizierungsfragen JN0-314
NO.11 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A
Juniper testantworten JN0-314 JN0-314
NO.12 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D
Juniper JN0-314 JN0-314 antworten JN0-314 dumps
NO.13 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B
Juniper prüfungsunterlagen JN0-314 JN0-314 JN0-314 antworten
NO.14 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A
Juniper exam fragen JN0-314 JN0-314 JN0-314 JN0-314
NO.15 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B
Juniper JN0-314 JN0-314 JN0-314 JN0-314 zertifizierungsfragen
Die Produkte von Pass4Test werden den Kandidaten nicht nur helfen, die Juniper JN0-314 Zertifizierrungsprüfung zu bestehen, sondern Ihnen auch einen einjährigen kostenlosen Update-Service zu bieten. Sie wird den Kunden die neuesten Prüfungsmaterialien so schnell wie möglich liefern, so dass die Kunden die Prüfunginformationen wissen. Deshalb ist Pass4Test eine erstklassige Website von guter Qualität. Außerdem ist der Service hier auch ausgezeichnet.
没有评论:
发表评论