Pass4Test ist eine Website voller Zuversicht. Die IT-Profis von Pass4Test widmen sich die Studie der vielfältigen IT-Zertifizierungsprüfungen, um die Effektivität der Erfolg der Prüfungen zu verbessern. Solange Sie einmal Pass4Test Unterlagen probieren, wollen Sie unbedingt sie wieder benutzen, weil wir Pass4Test nicht nur Ihnen die besten Zertifizierungsunterlagen, sondern auch den besten Service anbieten. Wenn Sie irgendwelche Meinungen haben, senden Sie bitte ihre Vorschläge an uns per E-Mail. Wir hoffen, wir helfen Prüfungsteilnehmern Erfolg machen und auch bieten den besten Service.
Heutzutage, wo die Zeit in dieser Gesellschaft sehr geschätzt wird, schlage ich Ihnen vor, die kurze Ausbildung von Pass4Test zu wählen. Sie können mit weniger Zeit und Geld die Cisco 642-681 Zertifizierungsprüfung nur einmal bestehen können.
Exam Code: 642-681
Prüfungsname: Advanced Wireless LAN for System Engineers Exam
Aktulisiert: 2014-01-05
Nummer: 93 Q&As
Das IT-Expertenteam hat nach ihren Kenntnissen und Erfahrungen die Qualität der Schulungsunterlagen immer noch vervessert, um die Bedürfnisse der Kandidaten abzudecken und den Kandidaten zu helfen, die Cisco 642-681-Prüfung zu bestehen. Sie können im Pass4Test die neuesten und schnellsten und richtigsten bekommen. Die Produkte von Pass4Test sind sehr umfangreich und kann den Kandidaten viel Bequemlichkeiten bieten. Die Erfolgsquote beträgt 100%. Sie können ganz ruhig die Prüfung machen und die Zertifizierung bekommen.
Wenn Sie noch zögern, ob Sie Pass4Test wählen, können Sie kostenlos Teil der Fragen und Antworten in Pass4Test Website herunterladen, um unsere Zuverlässigkeit zu bestimmen. Wenn Sie alle unsere Prüfungsfragen und Antworten herunterladen, geben wir Ihnen eine 100%-Pass-Garantie, dass Sie die Cisco 642-681 Zertifizierungsprüfung nur einmal mit einer hohen Note bestehen können.
Sind Sie mit Ihrer Arbeit zufrieden? Sind sie damit Zufrieden, was Sie jetzt machen? Wollen Sie Ihre Arbeitsfähigkeit erhöhen? Dann müssen Sie zuerst mehr nützliche Fähigkeiten für Ihre Arbeit beherrschen, indem Sie sich besser erhöhen. Und das wichtigste ist, dass Arbietsgeber wissen, Sie mehr Arbeitsfähigkeiten beherrschen. Dann nehmen Sie an Cisco 642-681 Prüfung teil. Diese Prüfung kann Sie Ihren Wunsch erreichen. Und es macht nichts, wenn Sie die Prüfungsfragen nicht genug kennen, weil Sie die Hilfe und die Vorbereitungswerkzeuge an Pass4Test finden können. Die Prüfungsfragen und-antworten können Ihnen helfen, Cisco 642-681 Zertifizierung zu bekommen.
Mit der Cisco 642-681 Zertifizierungsprüfung werden Sie sicher bessere Berufsaussichten haben. Die Cisco 642-681 Zertifizierungsprüfung kann nicht nur Ihre Fertigkeiten, sondern auch Ihre Zertifikate und Fachkenntnisse beweisen. Die den Schulungsunterlagen zur Cisco 642-681 Zertifizierungsprüfung von Pass4Test sind eine von der Praxis bewährte Software. Mit ihr können Sie eine bessere Theorie bekommen. Vorm Kauf können Sie eine kostenlose Probeversion bekommen. So kennen Sie die Qualität unserer Schulungsmaterialien. Pass4Test ist Ihnen die beste Wahl.
Wenn Sie unsere Lernmaterialien zur Cisco 642-681 Zertifizierungsprüfung benutzen, werden sicher die Zeit-und Wirtschaftskosten reduziert. Vorm Kauf unserer Cisco 642-681 können Sie kostenlos unsere Fragen herunterladen.Sie sind in der Form von PDF und Software. Wenn Sie die Softwareversion brauchen, bitte setzen Sie sich inVerbindung mit dem Kundenservice.
642-681 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/642-681.html
NO.1 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable
plant will support it.
Which deployment option would provide the most benefit to the customer?
A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D
B. point-to-multipoint solution with the root bridge located at the manufacturing facility
C. point-to-multipoint solution with the root bridge located at the corporate office
D. point-to-multipoint solution with the root bridge located at the R&D facility
Answer: D
Cisco 642-681 642-681
NO.2 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by
the Wireless LAN Controller? (Choose three.)
A. ad-hoc network detection
B. rogue network detection
C. rogue access point detection
D. deauth flood detection
E. fake access point detection
F. NetStumbler detection
Answer: DEF
Cisco prüfung 642-681 prüfungsfragen 642-681 originale fragen 642-681 642-681
NO.3 A customer has a small remote site with 10 standalone access points. In which two of the following
scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.)
A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available.
B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available.
C. EAP-FAST security is required and no external AAA server is available.
D. EAP-FAST security is required and an AAA server is available.
E. MAC authentication is required and no external AAA server is available.
F. MAC authentication is required and an external AAA server is available.
Answer: BC
Cisco dumps 642-681 antworten 642-681 prüfungsunterlagen 642-681
NO.4 Which two key features are unique to the controller-based feature set? (Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. access point registration via digital certificate
E. dynamic RF control without a dedicated management platform
Answer: DE
Cisco prüfungsunterlagen 642-681 antworten 642-681 zertifizierung 642-681 testantworten 642-681
NO.5 How many prior configuration versions can be archived on the CiscoWorks WLSE?
A. two
B. four
C. six
D. eight
Answer: B
Cisco 642-681 642-681
NO.6 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance?
(Choose three.)
A. wireless controller
B. wireless domain server
C. Cisco Wireless Control System
D. controller-based access point
E. standalone access point
F. CiscoWorks Wireless LAN Solution Engine
Answer: ACD
Cisco originale fragen 642-681 exam fragen 642-681 642-681 zertifizierung 642-681
NO.7 How is a bridge group name used in a wireless mesh deployment?
A. It is used to retrieve the secret shared key.
B. It logically groups access points to avoid interference from neighboring mesh networks.
C. It is used as a password in communication preceding LWAPP.
D. It is used to join the outdoor mesh network with the controller mobility group.
Answer: B
Cisco 642-681 dumps 642-681 echte fragen 642-681
NO.8 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70-percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the current
cable plant will support it.
A wireless bridging solution would provide which three benefits to the customer? (Choose three.)
A. rapid deployment
B. immunity to weather
C. increased bandwidth
D. guaranteed bandwidth
E. increased security
F. lower total cost of ownership
Answer: ACF
Cisco 642-681 prüfungsfrage 642-681 642-681
NO.9 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.)
A. It supports up to 100 access points per module.
B. It supports up to 200 access points per module.
C. It supports up to 300 access points per module.
D. It has a maximum of four modules per chassis.
E. It has a maximum of five modules per chassis.
F. It has a maximum of six modules per chassis.
Answer: CE
Cisco zertifizierungsantworten 642-681 642-681
NO.10 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS?
A. 50
B. 100
C. 150
D. 200
Answer: B
Cisco zertifizierungsfragen 642-681 antworten 642-681 642-681 642-681 antworten
NO.11 In a mesh network, what is the recommended hop-count limit of a mesh access point from its
associated root access point?
A. 2
B. 4
C. 6
D. 8
Answer: B
Cisco 642-681 originale fragen 642-681 642-681 zertifizierungsfragen
NO.12 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access
points?
A. Cisco 1812
B. Cisco 1811
C. Cisco 1841
D. Cisco 1803
Answer: C
Cisco 642-681 642-681 dumps 642-681 642-681 antworten
NO.13 A customer in the United States requires connectivity between two campus locations that are located
6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is
known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the
interference? (Choose two.)
A. Cisco Aironet 1100 Series Access Point
B. Cisco Aironet 1210 Series Access Point
C. Cisco Aironet 1242AG Series Access Point
D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge
E. Cisco Aironet 1400 Series Wireless Bridge
Answer: CE
Cisco dumps 642-681 zertifizierungsantworten 642-681 prüfungsfragen
NO.14 Which statement describes how RSSI information is processed in a WLAN with a location appliance
using controller-based products?
A. Access points aggregate RSSI information.
B. WLAN controllers compute RSSI information.
C. The location appliance collects the RSSI information.
D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location
appliance.
Answer: C
Cisco 642-681 642-681 642-681 642-681 642-681
NO.15 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location
Appliance can track, operating with Cisco WCS version 4.0?
A. 500
B. 1000
C. 1500
D. 2500
Answer: D
Cisco 642-681 642-681 zertifizierungsfragen
NO.16 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D
Cisco 642-681 echte fragen 642-681 prüfungsunterlagen 642-681
NO.17 What is the maximum number of access points that a high-end Cisco WCS server can support?
A. 500
B. 1000
C. 1500
D. 3000
Answer: D
Cisco zertifizierungsantworten 642-681 642-681 prüfungsfragen 642-681 zertifizierungsantworten
NO.18 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks
WLSE 1130-19 with RF management enabled?
A. 1000
B. 1500
C. 1800
D. 2500
Answer: C
Cisco testantworten 642-681 642-681 prüfungsunterlagen
NO.19 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two
FCC-approved frequency ranges? (Choose two.)
A. 900 to 928 MHz
B. 2.400 to 2.4835 GHz
C. 4.940 to 4.990 GHz
D. 5.150 to 5.250 GHz
E. 5.725 to 5.825 GHz
Answer: BC
Cisco 642-681 echte fragen 642-681 642-681 642-681 642-681
NO.20 OFDM provides which improvement over DSSS in the 2.4-GHz range?
A. greater resistance to multipath interference
B. more nonoverlapping channels
C. more bandwidth per channel
D. full-duplex communication
Answer: A
Cisco 642-681 642-681 642-681 zertifizierungsantworten
Pass4Test bietet Ihnen die neusten 000-455 exam Unterlagen und 70-481 pdf Fragen & Antworten mit hoher Qualität. Unser E20-891 zertifizierung und CTAL-TM_Syll2012 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 1Z0-807 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/642-681.html
没有评论:
发表评论