Wenn Sie sich zur Hitachi HH0-260 Zertifizierungsprüfung anmelden, sollen Sie sofort gute Lernmaterialien oder Ausbildungskurse wählen, um sich auf die Prüfung vorzubereiten. Denn die Hitachi HH0-260 Zertifizierungsprüfung ist eine schwierige Prüfung und Sie müssen dafür ausreichende Vorbereitungen treffen.
Das Expertenteam von Pass4Test nutzt ihre Erfahrungen und Kenntnisse aus, um die Schulungsunterlagen zur Hitachi HH0-260 Zertifizierungsprüfung zu bearbeiten. Unsere Schulungsunterlagen zur Hitachi HH0-260 Zertifizierungsprüfung sind bei den Kunden sehr beliebt. Das sind die Ergebnisse der fleißigen Experten-Teams. Diese Simulationsfragen und Antworten sind von guter Qualität. Und die Ähnlichkeit beträgt über 95%. Sie sind eher zuverlässig. Wenn Sie die Trainingsinstrumente von Pass4Test benutzen, können Sie 100% die Hitachi HH0-260 Zertifizierungsprüfung bestehen.
Exam Code: HH0-260
Prüfungsname: Hitachi (Hitachi Data Systems Certified Implementer File Services)
Die Schulungsunterlagen sind den echten Prüfungen ähnlich. Durch die kurze Sonderausbildung können Sie schnell die Fachkenntnisse beherrschen und sich gut auf die Prüfung vorbereiten. Wir versprechen, dass wir alles tun würden, um Ihnen beim Bestehen der Hitachi HH0-260 Zertifizierungsprüfung helfen.
Die Kandidaten können die Schulungsunterlagen zur Hitachi HH0-260 Zertifizierungsprüfung von Pass4Test in einer Simulationsumgebung lernen. Sie können die Prüfungssorte und die Testzeit kontrollieren. In Pass4Test können Sie sich ohne Druck und Stress gut auf die Prüfung vorbereiten. Zugleich können Sie auch einige häufige Fehler vermeiden. So werden Sie mehr Selbstbewusstsein in der Prüfung haben. Im realen Test können Sie Ihre Erfahrungen wiederholen, um Erfolg in der Prüfung zu erzielen.
Pass4Test ist nicht nur zuverlässig, sondern bietet auch erstklassigen Service. Wenn Sie die Prüfung nach dem Kauf der Pass4Test-Produkte nicht bestehen, versprechen wir Ihnen 100% eine volle Rückerstattung. Pass4Test steht Ihnen auch einen einjährigen kostenlosen Update-Service zur Verfügung.
HH0-260 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HH0-260.html
NO.1 A customer expects to store 4 billion objects with an initial HCP configuration. Search is not
required at this time.
Which configuration will meet the requirements for this customer?
A. HCP 300 with ten storage nodes
B. HCP 500 with two storage nodes
C. HCP 300 with four storage nodes
D. HCP 500 with eight storage nodes
Answer: A
Hitachi HH0-260 HH0-260 exam fragen
NO.2 Your customer wants to use IP addresses which conflict with the default HCP network
settings. As a result you need to change the back-end IP addresses for each HCP node.
Which HCP network settings should you change?
A. the back-end gateway router IP address
B. the back-end subnet mask
C. the first three octets of the back-end IP addresses
D. the fourth octet of the back-end IP addresses
Answer: C
Hitachi HH0-260 HH0-260 exam fragen HH0-260 exam fragen HH0-260
NO.3 A storage administrator on a customer site is performing a diagnosis of the HCP system by
reviewing the system event logs.
Which two are recorded in the system events log? (Choose two.)
A. logical volume failures
B. namespace list
C. users deleted
D. roles assigned
Answer: A,C
Hitachi prüfung HH0-260 originale fragen HH0-260 HH0-260
NO.4 You are establishing a replication link between two HCP platforms. You set the performance
level as
part of the configuration options. What does this setting indicate?
A. the server priority rate for nodes associated with that replication link
B. the amount of bandwidth made available for replication on the link
C. the number of concurrent replication operations that can occur on each node
D. the data transfer rate associated with each tenant namespace
Answer: C
Hitachi exam fragen HH0-260 HH0-260 zertifizierungsfragen HH0-260 HH0-260 zertifizierungsantworten
NO.5 What is the required zone configuration of a SAN fabric to support a HCP 500?
A. one global zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports and
the
storage ports
B. one zone per HCP node containing two members: World Wide Port Names (WWPN) of the HBA
port
and the storage port
C. two mirrored zones; one containing the even numbered World Wide Port Names (WWPN) of the
HBA
port and the storage port; the other containing odd numbered ports
D. two zones: one zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports
and
the second zone containing all the storage ports
Answer: B
Hitachi HH0-260 testantworten HH0-260 HH0-260 originale fragen
NO.6 Which two factors should you consider prior to performing an upgrade? (Choose two.)
A. the physical location of the highest numbered search node
B. the physical location of the highest numbered storage node
C. the install user password
D. the service user password
Answer: B,C
Hitachi HH0-260 HH0-260 zertifizierungsantworten HH0-260
NO.7 Which two statements are true about the HCP back-end network? (Choose two.)
A. All nodes in a HCP system must be on the same system-specific private back-end IP subnet.
B. All nodes in a HCP system must be split across a dual-redundant private back-end IP subnet.
C. The fourth octet of the back-end IP addresses should not be changed after it has been
configured.
D. The fourth octet of the back-end IP addresses must match the fourth octets used in the front-end
IP
addresses.
Answer: A,C
Hitachi HH0-260 prüfungsunterlagen HH0-260 testantworten HH0-260
NO.8 You are adding two more volumes into each node of a HCP 500 DL. The storage administrator
informs you that all SAN volumes have been created, zoned and presented to the HCP.
Which LUN number presented to the HCP will cause a problem.?
A. 5
B. 128
C. 130
D. 131
Answer: B
Hitachi echte fragen HH0-260 HH0-260
NO.9 How should the RAID group(s) and logical volume(s) be configured on a HCP 300 node?
A. three RAID groups each with three logical volumes
B. three RAID groups each with a single logical volume
C. a single RAID group with a single logical volume
D. a single RAID group with three logical volumes
Answer: D
Hitachi HH0-260 prüfungsunterlagen HH0-260
NO.10 Which node architecture is used by the HCP 500?
A. SAIN
B. PAIN
C. RAIN
D. NAIN
Answer: A
Hitachi HH0-260 prüfung HH0-260 originale fragen HH0-260 antworten HH0-260
NO.11 Which three replication types are supported by HCP? (Choose three.)
A. chain
B. many-to-one
C. one-to-many
D. bidirectional
E. link level
Answer: A,B,D
Hitachi HH0-260 prüfung HH0-260 HH0-260
NO.12 A customer has an existing HCP 500 consisting of four storages nodes. They have just
purchased an additional HCP 500 and you are informed that you will be performing the replication
setup.
What is the requirement prior to setting up replication?
A. trusted replication server certificates
B. replication link
C. outbound link name
D. inbound link name
Answer: A
Hitachi originale fragen HH0-260 HH0-260 HH0-260 HH0-260
NO.13 Which three tenant management console permissions does the security role have on a HCP?
(Choose three.)
A. View namespace access protocol configurations.
B. View tenant log messages about security events.
C. View tenant overview.
D. Monitor replication.
E. Modify tenant management console security settings (HCP tenants only).
Answer: B,C,E
Hitachi zertifizierung HH0-260 originale fragen HH0-260 HH0-260
NO.14 Which three statements are true about encryption on a HCP? (Choose three.)
A. Once enabled, encryption cannot be disabled.
B. The encryption key is accessible through the system management console.
C. Encryption can only be enabled at the time of installation.
D. The encryption key must be written down and given to the customer.
E. The encryption key is displayed several times during the installation process.
Answer: A,C,D
Hitachi HH0-260 prüfungsfrage HH0-260 HH0-260 zertifizierungsantworten HH0-260 HH0-260 prüfungsunterlagen
NO.15 A customer will be removing old Windows file servers and moving existing data to the default
namespace on their new HCP 500.
Which protocol is recommended to accomplish the move?
A. CIFS
B. HTTP
C. REST
D. NFS
Answer: A
Hitachi prüfungsunterlagen HH0-260 testantworten HH0-260 HH0-260
NO.16 Which OS LUN size do all HCP 300 configurations use?
A. 20 GB
B. 30 GB
C. 50 GB
D. 400 GB
Answer: B
Hitachi HH0-260 HH0-260 zertifizierungsantworten
NO.17 You are configuring a HCP 500 solution with AMS 2100 storage. You choose to configure the
storage devices first in the list of tasks associated with this process.
What is the reason for sequencing the tasks in this way?
A. The HCP software must first be installed on the AMS 2100 for access.
B. Formatting the storage containers will take a considerable amount of time.
C. You must have the data LUNs established before you can install the core OS.
D. The HCP command LUN must be established on the AMS 2100.
Answer: B
Hitachi HH0-260 prüfungsunterlagen HH0-260 prüfung HH0-260
NO.18 A customer wants to ingest around 1 million files residing in several Windows 2003 and
RedHat Linux servers into three newly created HCP tenants and namespaces.
Which two procedures do you recommend? (Choose two.)
A. Use copy, move and create directory functions available from HCP client tools for Linux.
B. Use copy, move and create directory functions available from Linux server.
C. Use copy, move and create directory functions available from HCP client tools for Windows.
D. Use copy, move and create directory functions available from Windows server.
Answer: A,C
Hitachi HH0-260 HH0-260 prüfung HH0-260
NO.19 You have performed an upgrade on a customer's HCP. You complete the upgrade and verify
that all the nodes are online and then give the system back to the customer. A few minutes later,
the customer
complains that they can read existing content but they cannot create new content on the HCP.
Which step was missed?
A. The install user password was changed.
B. The upgrade was not committed.
C. The rollback was not performed.
D. The system management console is disabled.
Answer: B
Hitachi echte fragen HH0-260 HH0-260 antworten HH0-260 zertifizierungsfragen
NO.20 In a SAIN based HCP solution, which RAID protection scheme is considered standard use with
an
AMS 2000 system?
A. RAID 5 (6+1)
B. RAID 6 (5+2)
C. RAID 6 (6+2)
D. RAID 5 (7+1)
Answer: B
Hitachi prüfung HH0-260 prüfungsfrage HH0-260 HH0-260 HH0-260
Die Schulungen für die Vorbereitung der Hitachi HH0-260 Zertifizierungsprüfung beinhalten die Simalationsprüfungen sowie die jetzige Prüfung zur Hitachi HH0-260 Zertifizierungsprüfung. Im Internet haben Sie vielleicht auch einige ähnliche Ausbildungswebsites gesehen. Nach dem Vergleich würden Sie aber finden, dass die Schulungen zur Hitachi HH0-260 Zertifizierungsprüfung von Pass4Test eher zielgerichtet sind. Sie sind nicht nur von guter Qualität, sondern sind auch die umfassendeste.
没有评论:
发表评论