CheckPoint 156-315-71 zertifizierung

Nun gibt es viele IT-Profis in der ganzen Welt und die Konkurrenz der IT-Branche ist sehr hart. So viele IT-Profis entscheiden sich dafür, an der IT-Zertifizierungsprüfung teilzunehmen, um ihre Position in der IT-Branche zu verstärken. Die 156-315-71-Prüfung ist eine sehr wichtige CheckPoint-Zertifizierungsprüfung. Aber wenn Sie eine CheckPoint-Zertifizierung erhalten wollen, müssen Sie die Prüfung bestehen.

Aus der Perspektive der Prüfung ist es notwendig, Ihnen die Prüfungstechnik zu lehren. Sie sollen weise wählen und keine Chance verpassen. Pass4Test ist eine großartige Website, die gute Schulungsressourcen bietet, die Prüfungs-und Untersuchungs-und Technikmaterialien und ausführliche Fragen und Antworten enthalten. Die Prüfungswebsites nehmen in den letzten Jahren rasch zu. Das ist vielleicht der Grund, wieso Sie so verwirrt gegenüber der CheckPoint 156-315-71 Zertifizierungsprüfung sind. Die Schulungsunterlagen zur CheckPoint 156-315-71 Zertifizierungsprüfung von Pass4Test werden von einigen Fachleuten und vielen Kandidaten bewiesen, dass sie effizient sind. Sie können Ihnen helfen, die Zertifizierungsprüfung zu bestehen.

Sie brauch nicht so viel Geld und Zeit, nur ungefähr 30 Stunden spezielle Ausbildung, dann können Sie ganz einfach die CheckPoint 156-315-71 Zertifizierungsprüfung nur einmal bestehen. Pass4Test bietet Ihnen die Prüfungsthemen, deren Ähnlichkeit mit den realen Prüfungsübungen sehr groß ist.

Pass4Test ist nicht nur zuverlässig, sondern bietet auch erstklassigen Service. Wenn Sie die Prüfung nach dem Kauf der Pass4Test-Produkte nicht bestehen, versprechen wir Ihnen 100% eine volle Rückerstattung. Pass4Test steht Ihnen auch einen einjährigen kostenlosen Update-Service zur Verfügung.

Exam Code: 156-315-71
Prüfungsname: Check Point Certified Security Expert R71
Aktulisiert: 2013-11-07
Nummer: 480 Q&As

156-315-71 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/156-315-71.html

NO.1 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint prüfungsfrage   156-315-71 prüfungsunterlagen   156-315-71 antworten   156-315-71

NO.2 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint   156-315-71   156-315-71

NO.3 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint zertifizierungsfragen   156-315-71   156-315-71 dumps   156-315-71

NO.4 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint   156-315-71 zertifizierungsfragen   156-315-71

NO.5 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint zertifizierungsfragen   156-315-71   156-315-71   156-315-71 prüfung   156-315-71 zertifizierung

NO.6 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint   156-315-71 prüfung   156-315-71   156-315-71 prüfung

NO.7 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint prüfungsunterlagen   156-315-71 prüfungsfrage   156-315-71 echte fragen   156-315-71 testantworten

NO.8 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint   156-315-71   156-315-71   156-315-71 prüfungsunterlagen   156-315-71 zertifizierungsfragen   156-315-71 originale fragen

NO.9 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint   156-315-71 zertifizierung   156-315-71 prüfungsfrage   156-315-71 exam fragen

NO.10 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint zertifizierungsantworten   156-315-71 zertifizierungsfragen   156-315-71

NO.11 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint   156-315-71 zertifizierung   156-315-71 prüfungsfragen

NO.12 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint   156-315-71 zertifizierungsfragen   156-315-71   156-315-71 antworten

NO.13 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint   156-315-71   156-315-71   156-315-71

NO.14 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint testantworten   156-315-71   156-315-71   156-315-71

NO.15 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint antworten   156-315-71 exam fragen   156-315-71 zertifizierungsfragen

NO.16 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint prüfungsunterlagen   156-315-71   156-315-71   156-315-71 dumps

NO.17 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint   156-315-71 exam fragen   156-315-71   156-315-71

NO.18 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint   156-315-71   156-315-71   156-315-71 prüfungsfragen   156-315-71 originale fragen   156-315-71 dumps

NO.19 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint zertifizierungsfragen   156-315-71   156-315-71   156-315-71 testantworten

NO.20 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint   156-315-71 dumps   156-315-71 prüfung

Die Prüfungsmaterialien zur CheckPoint 156-315-71 von Pass4Test sind kostengünstig. Wir bieten den Kandidaten die Simulationsfragen und Antworten von guter Qualität mit niedrigem Preis. Wir hoffen herzlich, dass Sie die Prüfung bestehen können. Außerdem bieten wir Ihen bequemen Online-Service und alle Ihren Fragen zur CheckPoint 156-315-71 Zertifizierungsprüfung lösen.