Pass4Test ist eine Website, die Ihnen zum Erfolg führt. Pass4Test bietet Ihnen die ausführlichen Schulungsmaterialien zur HP HP0-207 Zertifizierungsprüfung, mit deren Hilfe Sie in kurzer Zeit das relevante Wissen zur Prüfung auswendiglernen und die Prüfung einmal schnell bestehen können.
Pass4Test bietet verschiedene Schulungensinstrumente und Ressourcen zur Vorbereitung der HP HP0-207-Prüfung. Es umfasst Kurse, Praxis-Test, Test-Engine und einen Teil kostenloser PDF-Download.
Die HP HP0-207 Zertifizierungsprüfung zu bestehen ist nicht einfach. Die richtige Ausbildung zu wählen ist der erste Schritt zu Ihrem Erfolg. Und eine zuverlässige Informationensquelle zu wählen ist der Garant für den Erfolg. Pass4Test hat gute und zuverlässige Informationensquellen. Wenn Sie Produkte von Pass4Test wählen, versprechen wir Ihnen nicht nur, die HP HP0-207 Zertifizierungsprüfung 100% zu bestehen, sondern Ihnen auch einen einjährigen kostenlosen Update-Service zu bieten.
Pass4Test verspricht den Kunden, dass Sie die IT-Zertifizierungsprüfung 100% bestehen können. Die Qualität von Pass4Test wird nach den IT-Experten überprüft. Das wichtigste Merkmal unserer Produkte ist ihre Relevanz. Der Schulungskurs dauert nur 20 Stunden. Und Sie werden die HP HP0-207 Zertifizierungsprüfung dann leicht bestehen. Wenn Sie Pass4Test wählen, werden Sie dann sicher nicht bereuen. Denn es wird Ihnen Erfolg bringen.
Exam Code: HP0-207
Prüfungsname: Procurve Adaptive EDGE Fundamentals
Aktulisiert: 2013-11-17
Nummer: 120 Q&As
HP0-207 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP0-207.html
NO.1 You are installing a ProCurve switch at a customer site and must enable remote management
for network administrators. Which configuration parameter is necessary to ensure that
administrators can manage the switch even if they are on different IP networks?
A.default VLAN
B.default gateway
C.default password
D.default management profile
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.2 How is traffic prioritization accomplished with IEEE 802.1p?
A.802.1Q-compliant devices enforce priorities based on VLAN ID.
B.802.1Q-compliant devices set one of 8 values in a 3-bit field in the VLAN tag.
C.802.1Q-compliant devices set one of 64 values in a 6-bit field in the IP datagram header.
D.802.1Q-compliant devices dedicate a portion of available bandwidth to each prioritized conversation.
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.3 How do ProCurve switches, configured with link aggregation (also known as port trunking),
handle broadcast traffic?
A.Broadcast traffic is flooded through all of the ports in the trunk.
B.The switch sends a query and receives permission from potential receivers before flooding.
C.Broadcast traffic is handled in exactly the same way it would be without port trunking configured.
D.Broadcast traffic is flooded through non-trunked ports, but forwarded only through one of the ports in
the trunk.
Correct:D
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.4 At a customer site, you have configured four ProCurve switches for HP Switch Meshing and
Multiple Spanning Tree Protocol. How will the mesh appear to non-mesh switches in the same
spanning tree domain?
A.as a single device
B.as a set of devices without redundant links
C.as devices that cannot participate in the spanning tree
D.as a set of devices with spanning tree enabled to block redundant links
Correct:A
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.5 What are the primary solution categories of the Adaptive EDGE Architecture? Select THREE.
A.mobility
B.security
C.reliability
D.availability
E.upgradeability
F.convergence
G.cost-effectiveness
Correct:A B F
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.6 You are configuring a ProCurve Layer 2 switch to obtain time information from an SNTP server
located on a different IP network than the switch. Which configuration steps are necessary on the
switch to enable this functionality?
A.The switch cannot be configured to obtain time information from a server on a different IP network.
B.Define a default gateway for the switch, enable SNTP, use the sntp server command to enter the IP
address of the server.
C.Assign a port on the switch to a VLAN that includes the SNTP server, enable SNTP, configure the
switch for SNTP unicast mode.
D.Configure an IP address on the same IP network as the SNTP server, enable TimeP, configure the
switch for SNTP broadcast mode.
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.7 You must update the software on a customer's ProCurve Switch 5412zl. Which statement
correctly describes the process for this operation? Select TWO.
A.Use TFTP for direct serial transfer of the software.
B.Use FTP for in-band transfer of the software through an IP network.
C.Use TFTP for in-band transfer of the software through an IP network.
D.Transfer the software from your workstation using a direct serial transfer.
E.Instruct the switch to search for any available TFTP server without knowing its IP address.
Correct:C D
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.8 You are about to configure HP Switch Meshing on four ProCurve switches at a customer site.
All of the ports that will be included in the mesh are configured for membership in customer
VLANs. How will the mesh configuration affect the VLAN configuration?
A.The mesh ports will automatically become a tagged member of all configured VLANs.
B.The mesh ports will not be a member of any VLANs until you manually configure its VLAN assignments.
C.The mesh ports will not be 802.1Q-compliant and will only be able to retain membership in a single
untagged VLAN.
D.The mesh ports will automatically become a member of the default VLAN and must be configured for
other VLAN membership.
Correct:A
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.9 While using the CLI to configure a ProCurve switch, you must change context from the manager
level to the global configuration level. Which command do you use?
A.exit
B.write
C.global
D.enable
E.configure
Correct:E
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.10 While using the CLI to configure a ProCurve switch, you must move from the global
configuration level to the port context configuration level for port a1. Which command do you use?
A.port a1
B.ethernet a1
C.interface a1
D.configure a1
Correct:C
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.11 You are assigned to configure ProCurve switches at a customer site for in-band management.
Which are in-band management methods? Select TWO.
A.Telnet
B.SNMP
C.XMODEM
D.serial console
E.menu interface
Correct:A B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.12 You are about to update the software on a ProCurve switch. Which command do you use to view
a list of all software versions stored on the switch?
A.show run
B.show flash
C.show startup
D.show version
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.13 You must remotely manage a customer's switch using Telnet. Which configuration/monitoring
interfaces are available? Select TWO.
A.web interface
B.menu interface
C.ProCurve Manager
D.boot monitor interface
E.command line interface
Correct:B E
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.14 You configured Rapid Spanning Tree Protocol on four ProCurve Switch 5348xl switches at a
customer site. During the configuration, you forgot to configure the switches so that
switch-to-switch links are not defined as edge ports. Which statement describes the consequence
of your oversight?
A.The switches in the spanning tree will elect multiple Root bridges.
B.The switches will reject the spanning tree configuration and block all ports until the configuration is
corrected.
C.The switches will be unable to elect a Root bridge and will not be able to forward traffic until the
configuration is corrected.
D.The switches will require more time to elect the Root bridge and resolve the topology, but the spanning
tree will otherwise function normally.
Correct:D
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.15 You are implementing a fully connected HP Switch Mesh at a customer site. Which statement
describes a valid design guideline for HP Switch Meshing?
A.A switch may be connected to no more than four mesh domains.
B.Up to five Switch 5400zl Series switches can be included in a full mesh.
C.All links in a full mesh must operate at the same speed and use the same media type.
D.When a switch is configured for HP Switch Meshing protocol, all of the ports on that switch must
participate in the mesh.
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.16 What are the key principles of the Adaptive EDGE architecture? Select TWO.
A.Control to the Edge
B.Control to the Desktop
C.Command from the Center
D.Management from Anywhere
E.Security throughout the Network
Correct:A C
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.17 On switches that support the Switch Setup screen interface, which parameters can be
configured on the Switch Setup screen? Select TWO.
A.STP bridge priority
B.IP address of the TACACS+ server
C.system name and contact information
D.IP address and subnet mask for each VLAN
E.IP address and subnet mask for the default VLAN
Correct:C E
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.18 While examining the spanning tree configuration on a ProCurve switch, you notice that one of
the ports is in the Blocking state. Which statement describes how this port will function in this
state?
A.The port is completely blocked for all purposes.
B.The switch will not forward user traffic through that port, but will forward telnet traffic.
C.The switch will not forward user traffic through that port, but will forward BPDUs through that port.
D.The switch forwards user traffic through that port, but does not receive user traffic through that port.
Correct:C
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.19 You have been asked to configure IGMP on a ProCurve Switch 6200yl at a customer site. What
are the steps for enabling IGMP on the switch?
A.Enter the manager level, then issue the ip igmp command.
B.Enter the global configuration context, then issue the ip igmp command.
C.Enter the VLAN context for each VLAN that will support IGMP, then issue the ip igmp command.
D.Enter the interface configuration context for each port configured with a VLAN, then issue the ip igmp
command.
Correct:C
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
NO.20 A customer is planning a Power over Ethernet deployment for a large call center that will use
VoIP telephones. While planning the wiring closets for the deployment, the customer suggests
using the uplink ports of a ProCurve Switch 2650-PWR to provide power to a ProCurve Switch
2600-8-PWR. Which statement describes a correct response to this suggestion?
A.It is only possible if the second switch is a ProCurve Switch 2626-PWR.
B.It is not possible because the 2600-8-PWR cannot act as a Powered Device.
C.It is only possible if the customer adds a ProCurve 600 EPS/RPS to the first switch.
D.It is not recommended because the second switch will not have adequate power redundancy.
Correct:B
HP originale fragen HP0-207 HP0-207 HP0-207 originale fragen
Wenn Sie die Produkte von Pass4Test benutzen, haben Sie den ersten Fuß auf die Spitze der IT-Branche gesetzt und Ihrem Traum nähern. Die Fragen von Pass4Test kann Ihnen nicht nur helfen, die HP HP0-207 Zertifizierungsprüfung zu bestehen und Ihre Fachkenntnisse zu konsolidieren. Außerdem bieten wir Ihnen auch einen einjährigen kostenlosen Update-Service.
没有评论:
发表评论